Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
RZN171L
Camber: ................................................................................................................................................................................... 0° 20' ± 45' (0.33° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
Caster: ..................................................................................................................................................................................... 1° 45' ± 45' (1.75° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
Steering Inclination: .............................................................................................................................................................. 10° 30' ± 45' (10.5° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
VZN170L
Camber: ................................................................................................................................................................................... 0° 20' ± 45' (0.33° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
Caster: ..................................................................................................................................................................................... 1° 45' ± 45' (1.75° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
Steering Inclination: .............................................................................................................................................................. 10° 30' ± 45' (10.5° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
3. inspect camber, caster and steering axis inclination. If the steering axis inclination is not within the specification, after camber and caster have
correctly adjusted, recheck the steering knuckle front wheel for bearing or looseness.
Measuring Point Reference
4. Inspect toe-in. If the toe-in is not within the specification, adjust the rack ends.
(A + B) = 0° 12' ± 12' (0.02° ± 0.02°)
(C - D) = 2 ± 2 mm (0.08 ± 0.08 inch)
5. Adjust camber and caster.
a. Loosen the front and/or rear adjusting cam nuts.
b. Adjust the camber and caster by front and/or rear adjusting cams.
HINT: Try to adjust the camber and caster to the center value.
c. Torque the front and/or rear adjusting cam nuts.
Torque to 130 Nm (96 ft. lbs.)
6. Adjust toe-in and wheel angle. Tie rod end length left-right error: Less than 1.5 mm (0.059 inch)
HINT: First, check or adjust the lengths of the tie rod ends, then adjust the toe-in.
a. Remove the boot clamps.
b. Loosen the rack end lock nuts.
