Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
5. If necessary, replace oil seal.
a. Using SST 09950-60010 (09951-00250), 09950-70010 (09951-07100), press out the oil seal from the pinion bearing adjusting screw.
b. Coat a new oil seal lip with molybdenum disulfide lithium base grease.
c. Using SST 09950-60010 (09951-00250), 09950-70010 (09951-07100) press in the oil seal until it surface is flush with the pinion bearing
adjusting screw.
NOTICE: Make sure you install the oil seal facing the correct direction.
Disassembly and Assembly
