Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
INSPECTION AND REPLACEMENT
1. Inspect steering rack.
a. Using a: dial indicator, check the rack for runout and for teeth wear and damage.
Maximum Runout: 0.30 mm (0.0118 inch)
b. Check the back surface for wear and damage.
2. Inspect bearing.
a. Check the needle roller bearing for pockmarks or damage. If faulty, replace the rack housing.
b. Apply molybdenum disulfide lithium base grease to the inside of the bearing.
3. Inspect bushing.
a. Check the inside of the bushing of the cylinder end stopper for cracks. If faulty, replace the bushing.
b. Apply molybdenum disulfide lithium base grease to the inside of the bushing.
4. If necessary, replace oil seal.
a. Using SST 09950-60010 (09951-00320), 09950-70010 (09951-07100) and a hammer, tap out the oil seal from the bearing guide nut.
