Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
EYE BUSHING REPLACEMENT
Using SST 09550-10012 (09252-10010, 09553-10010) and a press, replace the bushing.
REPLACEMENT
1. Bend open spring clip. Using a chisel and a hammer, pry up the spring clip.
2. Remove center bolt. Hold the spring near the center bolt in a vise and remove the center bolt.
3. Replace spring clip.
a. Drill off the head of the rivet and drive it out.
b. Install a new rivet into the holes of the spring leaf and clip. Then rivet with a press.
