Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
INSTALLATION
Installation is in the reverse order of removal.
HINT: Rear propeller shaft 3-joint type:
^
Center bearing center line and the center bearing housing center line must be adjusted within°1 mm of each other in the vehicles longitudinal
direction when the vehicle is unloaded.
^
When adjusting the center bearing housing center line, it should be perpendicular to the axis of front propeller shaft.
HINT: With a grease gun, pump grease into each fitting until it begins to flow around the oil seal.
