Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
Case: Service and Repair
1. If necessary, replace front bearing retainer oil seal.
a. Using a screwdriver and hammer, drive out the oil seal.
b. Using Special Service Tool (SST) 09950-60010 (09951-00590), 09950-70010 (09951-07100) and a hammer, drive in a new oil seal until its
surface is flush with the retainer upper surface.
c. Coat the lip of the oil seal with MP grease.
2. If necessary, replace front case oil seal.
a. Using a screwdriver and hammer, drive out the oil seal.
b. Using SST 09316-60011 (09316-00011) and a hammer, drive in a new oil seal until its surface is flush with the case upper surface.
c. Coat the lip of the oil seal with MP grease.
