Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
/Page-925001.png)
Load Compensator: Testing and Inspection
ON-VEHICLE INSPECTION
HINT: Pre runner is the described below.
RZN191L-TRPDKAB, RZN196L-CRPDKAB, VZN195L-RPDKAB
1. SET REAR AXLE LOAD
Rear axle load (includes vehicle weight):
2. INSTALL LSP & BV GAUGE (SST) AND BLEED AIR
SST 09709-29018
3. RAISE FRONT BRAKE PRESSURE TO 7,845 kPa (80 kgf/cm2, 1,138 psi) AND CHECK REAR BRAKE PRESSURE
Rear Brake Pressure:
HINT: The brake pedal should not be depressed twice and/or returned while setting to the specified pressure. Read the value of rear brake
pressure 2 seconds after adjusting the specified fluid pressure. If the brake pressure is incorrect, adjust the fluid pressure.
