Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
/Page-1105001.png)
Control Assembly: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE BULB
2. REMOVE HEATER CONTROL CABLES
a. Using a screwdriver, spread the claw of the cable clamp and disconnect the outer cable.
HINT: Tape the screwdriver tip before use.
b. Remove the inner cable from the heater control base.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
