Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
/Page-1421001.png)
Tachometer: Testing and Inspection
INSPECT TACHOMETER (ON-VEHICLE)
a. Connect a tune-up test tachometer, and start the engine.
NOTE:
-
Reversing the connection of the tachometer will damage the transistors and diodes inside.
-
When removing or installing the tachometer, be careful not to drop or subject it to heavy shocks.
b. Compare the tester and tachometer indications.
DC 13.5 V 20 °C at (68 °F)
If error is excessive, replace the tachometer.
