Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
/Page-456001.png)
Crankshaft Position Sensor: Service and Repair
REPLACEMENT
1. REMOVE ENGINE UNDER COVER
2. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
Torque: 7.8 Nm (80 kg.cm, 69 in.lb)
3. REINSTALL NEW CRANKSHAFT POSITION SENSOR
a. Install the sensor with the bolt.
b. Connect the sensor connector.
4. REINSTALL ENGINE UNDER COVER
