Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
Standard Undercut Depth
Standard undercut depth:
Minimum undercut depth: 0.2 mm (0.008 in.)
If the undercut depth is less than minimum, correct it with a hacksaw blade.
3. INSPECT FIELD COIL
a. Check the field coil for open circuit.
Using an ohmmeter, check that there is continuity between the lead wire and field coil brush lead.
If there is no continuity, replace the field frame.
b. 1.4 kW:
Check the field coil for ground.
Using an ohmmeter, check that there is no continuity between the field coil end and field frame.
If there is continuity, repair or replace the field frame.
4. 1.8 kW:
INSPECT SHUNT COIL FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between terminal (A) and (B).
Standard resistance: 1.4 - 1.9 Ohm at 20°C (68 °F)
If the resistance is not as specified, repair or replace the field frame.