Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
a. Using a screwdriver and hammer, stake back the washer.
NOTICE: Avoid any Impact to the steering rack.
b. Using a spanner to hold the steering rack steady, and using SST, remove the rack end.
SST 09922-10010
NOTICE:
^
Use SST 09922-10010 in the direction shown in the illustration.
^
Mark the RH and LH rack ends.
5. REMOVE RACK HOUSING NO.2 BRACKET AND GROMMET
a. Place matchmarks, on the bracket and rack housing.
b. Remove the bolt.
6. REMOVE RACK GUIDE SPRING CAP LOCK NUT
Using SST, remove the nut.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.