Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
2. Install a new rivet into the holes of the spring leaf and clip. Then rivet with a press.
d. Install spring center bolt.
1. Align the leaf holes and secure the leaves with a vise.
2. Install the spring center bolt.
Torque: 44 Nm (450 kgf-cm, 33 ft. lbs.)
e. Bend the spring clip.
1. Using a hammer, bend the spring clip into the position.
3. 2WD (Except PreRunner): REPLACE SPRING BUMPER
a. Remove the 2 bolts and spring bumper.
b. Install the 2 bolts and spring bumper.
Torque: 29 Nm (300 kgf-cm, 22 ft. lbs.)
INSTALLATION
Installation is in the reverse order of removal.