Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
Four Wheel Drive Selector Switch: Testing and Inspection
With SR5
INSPECTION
1. INSPECT 2-4 SELECTOR SWITCH CONTINUITY
If continuity is not as specified, replace the shift lever knob.
2. INSPECT ACTUATOR RESISTANCE
a. Using an ohmmeter, measure the resistance between terminals 2 and 3.
Standard resistance: 0.3 - 100 ohms
b. Using an ohmmeter, measure the resistance between terminals 2 or 3 and body ground.
Standard resistance: More than 0.5 M ohms