Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
Speaker: Service and Repair
Rear Speaker Assy
Access Cab
REPLACEMENT
HINT:
-
Use the same procedures for the RH and LH sides.
-
The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE LAP BELT OUTER ANCHOR COVER
3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
4. REMOVE ACCESS PANEL WEATHERSTRIP REAR LH
5. REMOVE REAR SPEAKER ASSEMBLY
a. Disconnect the connector.
b. Remove the 3 screws and the rear speaker assembly.
6. INSTALL REAR SPEAKER ASSEMBLY
a. Install the rear speaker assembly with the 3 screws.
b. Connect the connector.
7. INSTALL ACCESS PANEL WEATHERSTRIP REAR LH
8. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
9. INSTALL LAP BELT OUTER ANCHOR COVER
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
Double Cab
REPLACEMENT
HINT:
-
Use the same procedures for the RH and LH sides.
-
The procedures listed below are for the LH side.