Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
Tailgate Cover: Service and Repair
TAILGATE PROTECTOR RH
REPLACEMENT
1. REMOVE TAILGATE PROTECTOR RH
a. Using a Torx(R) socket wrench T30, remove the 7 screws.
b. Apply protective tape to the outer circumference of the tailgate protector.
c. Using a moulding remover, disengage the 10 claws and remove the tailgate protector.
2. INSTALL TAILGATE PROTECTOR RH
a. Engage the 10 claws and install the tailgate protector.
b. Using a Torx(R) socket wrench T30, tighten the 7 screws.