Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
/Page-800011.png)
33. INSTALL BRAKE BOOSTER W/ACCUMULATOR PUMP ASSEMBLY
a. Install the 2 collars and 2 bushes onto the brake booster w/ accumulator pump assembly.
b. Using a hexagon wrench (4 mm), install the 2 pins.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
c. Install the brake booster w/ accumulator pump assembly.
d. Install a new clip.
e. Install the wire harness with the 2 screws.
Torque: 2.9 Nm (30 kgf-cm, 26 inch lbs.)
