Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
64. INSTALL CHAIN VIBRATION DAMPER NO.1
a. Install the vibration damper with the bolt and nut.
Torque: 21 Nm (214 kgf-cm, 15 ft. lbs.)
65. INSTALL CHAIN SUB-ASSEMBLY
a. As shown in the illustration, install the chain onto the sprocket and gear with the painted marks aligned with the timing marks on the sprocket
and gear.
HINT:
-
The camshaft mark plate is orange.
-
The crankshaft mark plate is yellow.
b. Use a rope to tie the chain of the crankshaft timing sprocket. Tie the rope near the sprocket.
NOTICE: After the chain tensioner has been installed, the rope must be removed.
HINT: The rope is tied to prevent gear jumping.