Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
/Page-1368001.png)
Map Lamp: Testing and Inspection
INSPECT MAP LAMP ASSEMBLY
a. Check the resistance.
1. Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) in the table.
If the result is not as specified, replace the map lamp assembly.
b. Check the lamp operation.
1. Connect the battery positive (+) lead to terminal 1 and the battery positive (-) lead to terminal 2, then check that the lamp comes on.
Standard: Lamp comes on.
If the lamp does not come on, replace the bulb.
