Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
Parts Information
Required Tools & Material
Required SSTs
Repair Procedure
1.
Using the Diagnostic Tester, check for Diagnostic Trouble Codes (DTCs). If DTC P0456 or P0445, and P0441 are present, check for an EVAP
leak on top of the fuel suction plate sub-assembly. Refer to the Technical Information System (TIS), 2005 model year Tacoma Repair Manual:
Diagnostics: SFI System (1GR-FE) / (2TR-FE): EVAP Inspection Procedure.
If NO EVAP leaks are detected at the fuel suction plate sub-assembly, this TSB does NOT apply. Please refer to the normal diagnostic procedure
provided in the Repair Manual.
2.
To correct the fuel suction plate sub-assembly, replace the fuel suction with pump and gauge tube assembly, retainer ring and gasket set according
to TIS, 2005 model year Tacoma Repair Manual: Fuel: Fuel Pump Assy: Removal & Installation And Disassembly & Reassembly (Tacoma).