Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
9. REMOVE FUEL TANK TO FILLER PIPE HOSE
a. Loosen the clamp bolt, then remove the fuel tank to filler pipe hose.
10. REMOVE FUEL TANK PROTECTOR NO.1
a. Remove the 4 clips, then remove the fuel tank protector.
11. INSTALL FUEL TANK PROTECTOR NO.1
a. Install the fuel tank protector with the 4 clips.
12. INSTALL FUEL TANK TO FILLER PIPE HOSE
a. Install the fuel tank onto the filler pipe hose, then tighten the pipe clamp bolt.
13. INSTALL FUEL SUCTION W/ PUMP & GAUGE TUBE ASSEMBLY
a. Install a new gasket onto the fuel tank.
b. Set the fuel pump assembly in the fuel tank.
NOTE: Be careful not to bend the arm of the sender gauge.