Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
4. REMOVE REAR SEAT BELT ASSEMBLY OUTER CENTER
a. Remove the bolt, floor anchor of the rear seat belt outer center and rear seat belt inner.
b. Insert the belt through the hole into the rear seat back frame.
c. Remove the bolt and rear seat belt outer center.
5. INSTALL REAR SEAT BELT ASSEMBLY OUTER CENTER
a. Check the amount of inclination required to lock the ELR.
1. Gently incline the retractor from its initial position. Check that the belt does not lock when the retractor is inclined 15° or less in any
directions. Also check that the belt locks when the inclination of the retractor is 45° or more.
NOTE: Do not disassemble the retractor.
b. Align the retractor with the positioning hooks of the rear seat back frame and install the retractor with the bolt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)