Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
(c) Connect the male portion of the wire seat jumper to the female portion of the floor wire harness, as shown in the illustration.
(d) Push and pull the connectors to confirm that they are locked in place.
(e) Insert the wire seat jumper connector clip into the slotted hole on the seat bracket.
(f) Connect the female portion of the wire seat jumper to the male portion of the floor wire harness, as shown in the illustration.
(g) Push and pull the connectors to confirm that they are locked in place.
(h) Confirm that the wire seat jumper is correctly routed.