toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Recall - Seat Belt Sensor Wire Harness Modification|Page 5551 > < Recall - Seat Belt Sensor Wire Harness Modification|Page 5549

Tacoma PreRunner L4-2.7L (2TR-FE) (2005)

Page 9
background image

NOTE:

Make sure to view the male end of the connector in the proper orientation as shown in the illustration.

(b) If the connector wires are correctly installed, installation of the wire seat jumper is NOT REQUIRED, proceed to section "VI. SSC

COMPLETION LABEL INSTALLATION".

(c) If the connector wires were NOT correctly installed, proceed to step "B. INSTALL THE WIRE SEAT JUMPER".

B. INSTALL THE WIRE SEAT JUMPER

1. RECORD THE RADIO STATION PRESETS

Recall - Seat Belt Sensor Wire Harness Modification|Page 5551 > < Recall - Seat Belt Sensor Wire Harness Modification|Page 5549