toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

All Technical Service Bulletins for Seat Belt Buckle Switch: > < Recall - Seat Belt Sensor Wire Harness Modification|Page 653
Page 1
background image

Seat Belt Buckle Switch: Recalls
Recall 05V302000: Seat Belt Position Sensor Defect

MAKE/MODELS:           MODEL/BUILD YEARS:      
     
Toyota/Tacoma            2005
 
MANUFACTURER: Toyota Motor North America, Inc.   
 
NHTSA CAMPAIGN ID NUMBER: 05V302000  RECALL DATE: June 27, 2005 

COMPONENT: Air Bags 

POTENTIAL NUMBER OF UNITS AFFECTED: 11592 

SUMMARY: 
 On certain regular cab pickup trucks equipped with a bench seat, the seat position and seat belt buckle sensor connector pins are incorrectly positioned
due to a wire harness manufacturing process error. 

CONSEQUENCE: 
 In this condition, the seat position and seat belt buckle sensor may not function as designed, affecting the adaptive air bag deployment, which if the
vehicle is involved in a crash, could result in improper occupant restraint. 

REMEDY: 
 Dealers will inspect the seat position and seat belt fastening condition sensor connector. An additional sub-wire harness will be installed to correct the
connector pin manufacturing error, if necessary. The recall is expected to begin during late July 2005. Owners should contact Toyota at 1-800-431-4331.

NOTES: 
 Customers can also contact The National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or
go to http://www.safercar.gov.

All Technical Service Bulletins for Seat Belt Buckle Switch: > < Recall - Seat Belt Sensor Wire Harness Modification|Page 653