Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
/Page-203002.png)
4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
a. Disconnect the 2 connectors.
b. Using a screwdriver wrapped with protective tape, disengage the claw and remove the windshield wiper switch assembly.
NOTE: The claw will break if pressed too hard.
5. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
a. Engage the claw and install the windshield wiper switch assembly.
b. Connect the 2 connectors.
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
7. INSTALL STEERING COLUMN COVER UPR
8. INSTALL STEERING COLUMN COVER LWR
