Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
Steering Mounted Controls Transmitter: Service and Repair
STEERING PAD SWITCH LH
REPLACEMENT
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE STEERING WHEEL COVER LOWER NO.2
3. REMOVE STEERING WHEEL COVER LOWER NO.3
4. REMOVE HORN BUTTON ASSEMBLY
5. REMOVE STEERING PAD SWITCH LH
a. Disconnect the connector.
b. Remove the screw.
c. Disengage the 2 pins and remove the steering pad switch LH.
d. Release the tab of the steering pad switch cable from the steering pad switch LH as shown in the illustration.