Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
4. REMOVE FRONT SUSPENSION UPPER ARM ASSY LH
a. Support the front suspension lower arm LH with a jack.
b. Remove the clip and nut.
c. Using SST, separate the upper ball joint from the steering knuckle.
SST 09628-62011
d. Remove the bolt and bracket.
e. Remove the bolt, 2 washers and nut.
f.
Remove the front suspension upper arm.
5. REMOVE FRONT SUSPENSION UPPER ARM BUSH LH
a. Using a hammer and chisel, raise the flange of the bushing diagonally as shown in the illustration.