Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
14. INSTALL FRONT STABILIZER BRACKET NO.1 LH
a. Install the front stabilizer bracket with the 2 bolts.
Torque: 40 Nm (408 kgf-cm, 30 ft. lbs.)
15. INSTALL FRONT STABILIZER BRACKET NO.1 RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
16. INSTALL FRONT STABILIZER LINK ASSY LH
a. Install the front stabilizer link assy LH with the 2 nuts.
Torque: 70 Nm (714 kgf-cm, 52 ft. lbs.)
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
17. INSTALL FRONT STABILIZER LINK ASSY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
18. INSTALL ENGINE UNDER COVER SUB-ASSY NO.1
Torque: 30 Nm (306 kgf-cm, 22 ft. lbs.)
19. INSTALL FRONT WHEELS
Torque: 113 Nm (1,152 kgf-cm, 83 ft. lbs.)