toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Seals and Gaskets, M/T > < Fluid - M/T|Capacity Specifications|Page 3151
Page 1
background image

Fluid - M/T: Testing and Inspection

MANUAL TRANSAXLE OIL

ON-VEHICLE INSPECTION

1. CHECK TRANSMISSION OIL

a. Park the vehicle in a level place.
b. Remove the transmission filler plug and gasket.
c. Check that the oil surface is within 5 mm (0.20 inch) of the lowest point of the transmission filler plug opening.

NOTICE: 
-

Problems may occur when the oil level is too high or low.

-

After replacing the oil, drive the vehicle and check the oil level again.

d. Check for oil leakage when the oil level is low.
e. Install the transmission filler plug and a new gasket.

Torque: 37 Nm (377 kgf-cm, 27 ft. lbs.)

Seals and Gaskets, M/T > < Fluid - M/T|Capacity Specifications|Page 3151