Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
Transmission Position Switch/Sensor: Service and Repair
PARK/NEUTRAL POSITION SWITCH ASSY
REPLACEMENT
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSY
a. Using a screwdriver, unstake the lock washer.
b. Remove the nut, lock washer and grommet.
c. Remove the bolt and park/neutral position switch.
4. INSTALL PARK/NEUTRAL POSITION SWITCH ASSY
a. Install the park/neutral position switch onto the manual valve lever shaft and provisionally tighten the adjusting bolt.