Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
/Page-1504004.png)
b. Using a torx(R) socket wrench (T30), remove the 2 screws and windshield wiper motor assembly.
10. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
a. Apply DENSO No.50 grease to the crank arm pivot of the windshield wiper motor assembly.
b. Using a torx(R) socket wrench (T30), install the windshield wiper motor assembly with the 2 screws.
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
c. Install the 2 rods onto the crank arm pivot of the windshield wiper motor assembly.
