Tacoma PreRunner L4-2.7L (3RZ-FE) (2004)
Heater Core: Service and Repair
HEATER RADIATOR
REMOVAL
1. REMOVE HEATER UNIT
2. REMOVE HEATER RADIATOR
a. Remove the 5 screws and 2 plates and clamp.
b. Pull out the heater radiator.
c. Remove the 2 screws and 2 clips then disconnect the heater radiator pipes.
HINT: At the time of reassembly please refer to the following item.
Do not reuse 2 O-rings.
INSTALLATION
Installation is in the reverse order of removal.