Tacoma PreRunner L4-2.7L (3RZ-FE) (2004)
1. Place the servomotor arm in the 'WARM" position and measure the resistance between terminals 2 and 3.
Please refer to the chart for specification.
2. Place the servomotor arm in the "COOL" position and measure the resistance between terminals 2 and 3.
Please refer to the chart for specification.
If resistance has no continuity, replace the servomotor.
3. INSTALL AIR MIX SERVOMOTOR
a. Install the 3 screws and servomotor.
b. Connect the servomotor connector.