Tacoma PreRunner L4-2.7L (3RZ-FE) (2004)
Control Assembly: Service and Repair
Disassembly and Reassembly
HEATER CONTROL ASSEMBLY
DISASSEMBLY
1. REMOVE A/C SWITCH KNOB AND REC SWITCH KNOB
Using a small screwdriver, pry out the 2 knobs.
HINT: Tape the small screwdriver tip before use.
2. REMOVE A/C AMPLIFIER
a. Remove the 5 screws.
b. Remove the A/C control panel case and amplifier.
3. REMOVE BULB
Using a screwdriver, turn the bulb to the left and pull out the bulb.
REASSEMBLY
Reassembly is in the reverse order of disassembly.