Tacoma PreRunner L4-2.7L (3RZ-FE) (2004)
Fuel Pressure Regulator: Service and Repair
Fuel Pressure Regulator
REMOVAL
1. DISCONNECT VACUUM SENSING HOSE FROM FUEL PRESSURE REGULATOR
2. DISCONNECT FUEL RETURN HOSE FROM FUEL PRESSURE REGULATOR
CAUTION: Put a suitable container or shop towel under the pressure regulator.
3. REMOVE FUEL PRESSURE REGULATOR
a. Remove the 2 bolts and fuel pressure regulator.
Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)
b. Remove the O-ring.
HINT: At the time of installation, please refer to the following items. Use a new O-ring.
INSTALLATION
Installation is in the reverse order of removal