Tacoma PreRunner L4-2.7L (3RZ-FE) (2004)
Starter Motor: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE FIELD FRAME AND ARMATURE
a. Remove the nut, and disconnect the lead wire from the magnetic switch terminal.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)
b. Remove the 2 through bolts.
Torque:
5.9 N.m (60 kgf.cm, 52 in.lbf) for 1.4 kW
9.3 N.m (93 kgf.cm, 82 in.lbf) for 2.0 kW
c. Pull out the field frame with the armature from the magnetic switch assembly.
HINT: At the time of reassembly, please refer to the following items.
Align the protrusion of the field frame with the cutout of the magnetic switch.
d. Remove the O-ring.
HINT: At the time of reassembly, please refer to the following items. Use a new O-ring.
2. REMOVE STARTER HOUSING, CLUTCH ASSEMBLY AND GEAR