Tacoma PreRunner L4-2.7L (3RZ-FE) (2004)
a. Using SST, remove the bearing.
SST 09286-46011
b. Using SST and a press, press in a new bearing.
NOTE: Be careful of the bearing installation direction.
SST 09820-00031
3. REPLACE MAGNETIC SWITCH TERMINAL KIT PARTS
a. Remove the 3 bolts, lead clamp, end cover, gasket and plunger.
b. Using vernier calipers, measure the contact plate for depth of wear.
Maximum wear: 0.9 mm (0.035 in.)