Tacoma PreRunner L4-2.7L (3RZ-FE) (2004)
DISASSEMBLY
REMOVE SUSPENSION SUPPORT AND COIL SPRING
a. Using SST, compress the coil spring until there is a clearance on both ends.
SST 09727-30021
NOTICE:
^
To avoid damage to SST, set SST arms to allow clearance to hold a 8-roll coil between them.
^
Do not compress the coil spring more than necessary.
^
Do not use an impact wrench. It will damage the SST.
b. Remove suspension support center nut.