Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
c. Install the tab of the steering pad switch cable onto the steering pad switch LH as shown in the illustration.
d. Engage the 2 pins and install the steering pad switch LH.
e. Install the screw.
f.
Connect the connector.
2. INSTALL HORN BUTTON ASSEMBLY
3. INSTALL NO. 3 LOWER STEERING WHEEL COVER
4. INSTALL NO. 2 LOWER STEERING WHEEL COVER
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
6. INSPECT HORN BUTTON ASSEMBLY
7. INSPECT SRS WARNING LIGHT