Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
2.
Remove the rear door weatherstrip.
A.
Disengage the 3 clips (2 at the top and 1 at the bottom).
NOTE:
It is NOT necessary to remove the trim panel.
B.
Using a clip remover, disengage the 20 clips and then remove the rear door weatherstrip.
NOTE:
Remove any residual tape remaining with 3M(TM) GPAC (or equivalent) on the top and bottom of the access door.
Front Door Opening Trim Weatherstrip:
1.
Remove the front door opening trim weatherstrip.
A.
Loosen the door sill trim garnish and kick panel.