toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brakes - Front Brake Noise When Applied Backing Up|Page 4583 > < Brakes - Front Brake Noise When Applied Backing Up|Page 4574
Page 1
background image

Brake Rotor/Disc: All Technical Service Bulletins
Brakes - Front Brake Noise When Applied Backing Up

BRAKES
BR005-07
REVISED

Title:
FRONT BRAKE NOISE IN REVERSE

Models:
'05 - '07 Tacoma 4X4 & PreRunner

August 30, 2007

TSB REVISION NOTICE:

^

September 12, 2007: The description in the Warranty Information table and steps 2 and 5 in the Repair Procedure have been updated.

Previous versions of this TSB should be discarded.

Introduction
Some customers may experience front brake noise when driving the vehicle in reverse and applying the brake pedal. The noise will typically occur when
backing out of a parking space after the vehicle has been stopped for an extended period of time. Updated front brake rotors and brake pad shim grease
are now available to improve this condition.

Applicable Vehicles

^

2005 - 2007 model year Tacoma 4x4 and PreRunner vehicles.

Parts Information

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Repair Procedure

1.

Conduct a road test to confirm the noise condition. The noise typically occurs when backing out of a parking spot in reverse.

2.

Remove the front brake pads and front rotors.

Brakes - Front Brake Noise When Applied Backing Up|Page 4583 > < Brakes - Front Brake Noise When Applied Backing Up|Page 4574