Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
4. REMOVE REC SWITCH
a. Using a screwdriver, pry out the REC switch.
HINT: Tape up the screwdriver tip before use.
5. REMOVE BULB
a. Using a screwdriver, turn the 2 bulbs counterclockwise and pull them out.
REASSEMBLY
1. INSTALL BULB
a. Using a screwdriver, turn the 2 bulbs clockwise to install them.
2. INSTALL REC SWITCH
a. Engage the 2 claws and install the REC switch.