Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
3. INSTALL EXPANSION VALVE
a. Apply sufficient compressor oil to 2 new seal washers and the fitting surface of the expansion valve.
Compressor oil: RL-897 or equivalent
b. Install the 2 seal washers onto the expansion valve.
c. Using "Torx" socket wrench T25, install the expansion valve with the 2 bolts.
Torque: 7.0 N.m (71 kgf.cm, 62 in.lbf)
4. INSTALL VALVE TO CONNECTOR TUBE
a. Apply sufficient compressor oil to 2 new seal washers and fitting surface of the valve to connector tube.
Compressor oil: RL-897 or equivalent
b. Install the 2 seal washers onto the valve to connector tube.
c. Using "Torx" socket wrench E10, install the air conditioning tube assembly with the bolt.
Torque: 25 N.m (255 kgf.cm, 18 ft.lbf)
5. INSTALL EVAPORATOR CORE
a. Attach the evaporator side seal to both sides of the evaporator.