Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
/Page-1294012.png)
g. Install the temperature mounting plate with the 3 bolts.
Torque: 2.0 N.m (20 kgf.cm, 18 in.lbf)
9. INSTALL AIR INLET CONTROL SERVO MOTOR
a. Install the air inlet control servo motor with the 2 bolts.
Torque: 2.0 N.m (20 kgf.cm, 18 in.lbf)
10. INSTALL AIR MIX CONTROL SERVO MOTOR
a. Install the air mix control servo motor with the 2 bolts.
Torque: 2.0 N.m (20 kgf.cm, 18 in.lbf)
11. INSTALL MODE CONTROL SERVO MOTOR
a. Install the mode control servo motor with the 3 bolts.
