toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fluid - A/T|Capacity Specifications|Page 1294 > < Fluid - A/T|Capacity Specifications|Page 1292
Page 1
background image

Fluid - A/T: Service and Repair

AUTOMATIC TRANSMISSION FLUID 

ADJUSTMENT 
1. BEFORE FILLING TRANSMISSION

-

This transmission requires Toyota Genuine ATF WS.

-

It is necessary to refill the transmission with the correct amount of fluid.

-

The vehicle must remain level while adjusting the transmission fluid level.

-

On vehicles equipped with active suspension, turn the suspension control switch OFF if it is necessary to jack up the vehicle with the engine
running.

2. TRANSMISSION PAN FILL

a. Remove the refill plug and overflow plug.

b. Fill the transmission through the refill hole until fluid begins to trickle out of the overflow tube.
c. Reinstall the overflow plug.

3. TRANSMISSION FILL

a. Fill the transmission with the correct amount of fluid as listed in the table.

b. Reinstall the refill plug to avoid fluid splash.

HINT: If you cannot add the listed amount of fluid, do the following:
-

Install the refill plug.

-

Allow the engine to idle with the air conditioning OFF.

-

Move the shift lever through entire gear range to circulate fluid.

-

Wait for 30 seconds with the engine idling.

Fluid - A/T|Capacity Specifications|Page 1294 > < Fluid - A/T|Capacity Specifications|Page 1292