Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
/Page-1177014.png)
a. Using SST and a press, remove the control valve upper bearing and control valve upper oil seal from the control valve housing.
SST 09950-60010 (09951-00250), 09950-70010 (09951-07150)
15. REMOVE CYLINDER END STOPPER
a. Using a screwdriver and hammer, turn the cylinder end stopper clockwise until the wire end can be seen through the service hole.
b. Using a screwdriver and hammer, turn the cylinder end stopper counterclockwise, and remove the wire and cylinder end stopper.
16. REMOVE POWER STEERING RACK
17. REMOVE POWER STEERING RACK BUSH
a. Remove the rack bush from the power steering rack.
b. Using a screwdriver, remove the O-ring from the rack bush.
c. Using SST, remove the rack bush oil seal.
SST 09527-21011, 09612-24014 (09613-22011)
18. REMOVE POWER STEERING CYLINDER TUBE OIL SEAL
a. Using SST and a press, remove the cylinder tube oil seal.
SST 09950-60010 (09951-00320), 09950-70010 (09951-07360)
