Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
3. SEPARATE SKID CONTROL SENSOR WIRE
a. Remove the 2 bolts, and separate the skid control sensor wire.
4. REMOVE FRONT SUSPENSION UPPER ARM
a. Support the front suspension lower arm LH with a jack.
b. Remove the clip and nut.
c. Using SST, separate the upper ball joint from the steering knuckle.
SST 09628-62011
d. Remove the bolt and bracket.
e. Remove the bolt, 2 washers and nut.
f.
Remove the front suspension upper arm.
DISASSEMBLY