Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
c. Remove the 2 bolts and disc brake caliper.
6. REMOVE FRONT DISC
7. REMOVE FRONT AXLE HUB GREASE CAP (for 4WD)
a. Using a screwdriver and a hammer, remove the front axle hub grease cap.
NOTICE: Do not damage the axle hub.
8. REMOVE FRONT AXLE HUB NUT (for 4WD)
a. Remove the cotter pin and lock cap.
b. Remove the front axle hub nut.
9. SEPARATE FRONT STABILIZER LINK ASSEMBLY
a. Remove the nut and separate the stabilizer link from the steering knuckle.
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.