Tacoma PreRunner V6-4.0L (1GR-FE) (2006)
c. Install the dust cover and axle hub onto the steering knuckle with the 4 bolts.
Torque: 80 Nm (816 kgf-cm, 59 ft. lbs.)
4. INSTALL FRONT WHEEL ADJUSTING NUT (for Pre-Runner)
a. Using SST, install a new front wheel adjusting nut.
SST 09318-12010
Torque: 275 Nm (2,804 kgf-cm, 203 ft. lbs.)
5. INSTALL FRONT AXLE HUB OIL SEAL (for 4WD)
a. Using SST and a press, install a new front axle hub oil seal.
SST 09527-17011, 09950-70010 (09951-07100), 09951-01000
6. INSTALL KNUCKLE GREASE RETAINER CAP (for Pre-Runner)
a. Using a brass bar and a hammer, install a new knuckle grease retainer cap.
NOTICE: Do not damage the knuckle grease retainer cap.
INSTALLATION
1. INSTALL FRONT AXLE HUB
2. INSTALL FRONT SUSPENSION UPPER ARM
a. Install a new nut and clip.
Torque: 110 Nm (1,122 kgf-cm, 81 ft. lbs.)